? all specifications are subject to change without notice. conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications. common mode filters(multilayer, smd) for high-speed differential signal line mcz series type: issue date: mcz2010ah [0804 inch]* (4 lines) * dimensions code jis[eia] december 2010
all specifications are subject to change without notice. (1/2) 001-01 / 20101218 / e9712_mcz2010_ah.fm common mode filters(smd) for high-speed differential signal line mcz series mcz2010ah type features compact sized multilayer common mode filter. by providing wide bandwidth for differential mode, this product has almost no effect for high-speed differential signals and can suppress the radiated emission. applications high speed interface(lvds and usb2.0) in electronics devices. pdp/lcd/dlp/pj tvs, dvd players, notebook pcs, dvcs, dscs, amusement machines, portable audio, digital cellular phones, etc. product identification (1) series name (2) dimensions l w (3) product identification number (4) impedance[at 100mhz] 900: 90 ? (5) packaging style t: taping shapes and dimensions/recommended pc board patt er n s circuit diagrams temperature range packaging style and quantities handling and precautions before soldering, be sure to preheat components. the preheat- ing temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150c. after mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. do not expose the inductors to stray magnetic fields. avoid static electricity discharge during handling. when hand soldering, apply the soldering iron to the printed cir- cuit board only. temperature of the iron tip should not exceed 350c. soldering time should not exceed 3 seconds. this product does not apply to flow soldering construction method. conformity to rohs directive mcz 2010 ah 900 t (1) (2) (3) (4) (5) operating/storage ?25 to +85c packaging style quantity taping 5000 pieces/reel 0.5 0.1 1.0 0.15 2.0 0.15 0.5 0.1 0.25 0.1 0.2 0.15 weight: 5.0mg dimensions in mm dimensions in mm 1.8 0.6 0.25 0.5 ~ no polarity conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
all specifications are subject to change without notice. (2/2) 001-01 / 20101218 / e9712_mcz2010_ah.fm electrical characteristics typical electrical characteristics impedance vs. frequency characteristics part no. common mode impedance ( ? ) [100mhz] dc resistance ( ? )max.[1 line] rated current idc(a)max. rated voltage edc(v)max. insulation resistance (m ? )min. MCZ2010AH900T 9025% 1.5 0.1 5 10 mcz2010ah121t 12025% 2.0 0.1 5 10 1 10 100 1000 10000 10000 1000 100 1 10 impedance ( ? ) frequency ( mhz ) 121 common mode 900 common mode 121 differential mode 900 differential mode
|
